Fast Storm Damage Restoration for Fresno, CA Homes and Businesses
When a storm damages your property in Fresno, CA, the first priority is keeping the water from doing more harm than the storm already has. Wind-driven rain, a compromised roof, or flooding from a heavy winter storm can leave water sitting inside walls, ceilings, and flooring long after the weather has passed.
We respond to storm-driven water intrusion at homes and businesses across Fresno, Madera, Tulare, Kings, Mariposa and Merced counties. Our team inspects the affected areas, begins extraction and drying, and documents the damage so you have a clear record for your insurance carrier. Call 24/7 — a real person answers, and we give you a realistic arrival window on the phone.
Emergency Storm Response and Property Stabilization
Once you've confirmed everyone is safe, the next concern is what the storm let into the building. A cracked roof tile, a failed window seal, or water pushed in around a door during a heavy storm all lead to the same problem: moisture working its way into materials that were never built to handle it.
Boarding up broken windows or tarping a damaged roof are exterior repairs, and they're best handled quickly by a roofing or general contractor before more weather moves through. That's not work we do directly. Where we come in is everything the water touches once it's inside — and the sooner that starts, the less of the property has to be replaced instead of dried.
Water Intrusion and Immediate Moisture Control
Standing water, soaked insulation, and damp drywall don't dry out on their own, even after the storm has cleared. We extract standing water, place air movers and dehumidifiers to begin drying the structure, and use moisture meters to track how each material is drying, room by room, instead of guessing when it's safe to close a job. For the full extraction and drying process, see our water damage restoration page.
Types of Storm Damage We Restore
Storms reach a property from more than one direction at once. Here's how the most common Central Valley storm scenarios show up as water damage inside a home or business, and what we do about each one.
Wind-Driven Rain and Roof Leaks
Rain that falls straight down mostly runs off a roof the way it's designed to. Rain pushed sideways by strong wind is different — it can work its way under shingles, through vent flashing, and around window and door seals that hold up fine in ordinary weather. The result is water inside the attic, ceiling, or wall cavity — what we treat as ceiling and roof leak water damage — sometimes well after the storm has passed and without an obvious leak point. We assess where the water has traveled, extract it, and dry the affected materials before hidden moisture turns into a bigger problem.
Hail Damage and Roof Leaks
Hail can crack roofing material or knock loose the seal around vents and flashing, opening a path for water to get in during the next rain. Repairing or replacing hail-damaged roofing is a job for a licensed roofer. Once that damage lets water into the structure, the interior cleanup and drying is ours — we respond to what the leak did inside the property, not to the roof itself.
Heavy Rain, Flooding, and Interior Water Damage
Winter storms and atmospheric river events can bring enough rain in a short window to overwhelm drainage around a property, especially on the slab-on-grade and raised-foundation homes common across the Valley. That water can move under doors, through grade-level openings, or up into a crawl space faster than most owners expect — what we handle as flood damage restoration when standing water covers a wider area, or crawl space water damage when it's contained beneath the home. We extract standing water from affected floors and crawl spaces, then bring in drying equipment sized to the space so materials aren't left holding moisture they can't shed on their own.
Storm Damage Repair, Cleanup, and Restoration Services
Storm damage restoration is more than removing standing water. Once we're on site, our work typically includes:
- Inspecting the property to identify where water entered and how far it has traveled
- Extracting standing water from floors, carpet, and crawl spaces
- Setting up air movers and dehumidifiers to dry the structure, with moisture readings tracked until materials are back to a normal range
- Removing drywall, insulation, flooring, or other materials that have absorbed too much water to dry in place
- Photographing and documenting every stage of the work for your insurance file
Reconstruction and repairs — replacing drywall, flooring, or other rebuilt materials — are completed by our licensed general contracting partner, Gostanian General Building Corp, CSLB Lic. #346866. We coordinate that handoff so you're not left finding a second contractor on your own once the drying is finished. You can read more about that process on our reconstruction services page.
How Our Storm Restoration Process Works
Every storm loss is a little different, but the process we follow stays consistent from the first call to the final walkthrough.
1. Safety Review and Damage Assessment
We start by checking the property for hazards — standing water near outlets, saturated ceilings, or unstable materials — before assessing how far the water has traveled and which materials are affected.
2. Water Extraction and Structural Drying
We remove standing water first, then place air movers, dehumidifiers, and moisture meters to bring the structure back down to a normal moisture range, checking readings until the job is verifiably dry rather than just dry to the touch.
3. Cleanup, Removal, and Documentation
Materials that absorbed too much water to dry in place — soaked insulation, ruined flooring, water-damaged drywall — are removed. We photograph and record the damage and the work performed at each stage for your insurance file.
4. Repair Coordination With Our Contracting Partner
If the property needs rebuilding once it's dry, we coordinate that work with our licensed general contracting partner, Gostanian General Building Corp, CSLB Lic. #346866, so repairs pick up where mitigation leaves off.
5. Final Walkthrough
Before we close out the job, we walk the property with you to confirm the affected areas are dry and the documentation matches what was done.
Storm Water Damage and Mold Prevention
A roof leak or flooded crawl space doesn't have to turn into a mold problem, but it can if the moisture sits too long. Wet insulation, soaked drywall, and a damp subfloor all hold humidity that mold can use within a day or two of a storm. We dry the affected materials and track moisture levels until they're back in a normal range, which is the main thing that keeps a water event from becoming a mold event. Our full drying and extraction process is described on our water damage restoration page, and if visible mold growth turns up once materials are exposed, we can bring in our mold remediation team to address it separately.
Insurance Documentation After Storm Damage
Whether storm damage is covered, and how much, depends on your policy and the cause of the water intrusion — that decision belongs to your insurance carrier, not to us. What we can do is document the loss thoroughly: photos of the affected areas before work begins, moisture readings throughout the drying process, and a record of the materials removed and the equipment used. That documentation gives you and your adjuster a clear, dated account of what happened and what it took to dry the property, which makes the claims conversation more straightforward on your end.
Commercial Storm Damage Restoration
Storm-related water intrusion doesn't pause a business the way it might pause a household — tenants still need access, inventory still needs protecting, and downtime has a cost of its own. We work with offices, retail spaces, apartment buildings, and other commercial properties across Fresno, CA to extract water, dry the structure, and document the damage for property managers, ownership groups, and their insurers. For more on how we approach larger commercial properties, visit our commercial restoration services page.
Why Choose a Local Storm Restoration Company in Fresno
After a bad storm moves through the Valley, it's common to see restoration crews show up from out of the area chasing the work, then move on once the immediate rush is over. We're not one of those. Central Valley Water Restoration is a father-and-son, family-owned company that's been serving Fresno and the surrounding counties since 2023, and we're the ones who answer the phone the next time you call — not a call center in another state.
We're IICRC-certified in Water Damage Restoration (WRT), Applied Structural Drying (ASD), and Applied Microbial Remediation (AMRT), so the drying and cleanup work follows the same recognized process every time. We serve Fresno, Madera, Tulare, Kings, Mariposa and Merced counties from our Fresno location, and we're available to call 24/7.
Get Storm Damage Help in Fresno, CA
If a storm has left water inside your home or business in Fresno, CA, don't wait for it to dry on its own or hope a small leak stays small. Call Central Valley Water Restoration and we'll walk you through what to expect, give you a realistic arrival window, and get started on extraction, drying, and documentation as soon as we're on site.